Welcome to Hurricane Electric's Tunnelbroker.net forums!
Started by Trax, August 16, 2013, 12:48:58 AM
QuoteAfter that, use netsh commands to advertise your address range to other clients
Steps to configure host to act as IPv6 router1. In CMD type: netsh int ipv6 set interface IP6Tunnel forwarding=enabled2. Next, type: netsh int ipv6 set interface "Local Area Connection" forwarding=enabled advertise=enabled3. Next, add the first address of the routed IP address to the Local Area Connection netsh int ipv6 add address "Local Area Connection" 2001:db8:8:a0a::14. Next, add the default route and next hop for the tunnel and Local Area Connection, then publish it: netsh int ipv6 set route 2001:db8:8:a0a::/64 "Local Area Connection" publish=yes5. Next, add the default route for the tunnel and publish it: netsh interface ipv6 set route ::/0 IP6Tunnel 2001:db8:7:a0a::1 publish=yes