Hurricane Electric's IPv6 Tunnel Broker Forums

Advanced search  

News:

Welcome to Hurricane Electric's Tunnelbroker.net forums!

Author Topic: IPsec transport mode supported on HE?  (Read 4082 times)

Doug0915

  • Newbie
  • *
  • Posts: 2
IPsec transport mode supported on HE?
« on: June 29, 2009, 10:42:30 AM »

I tried doing a manual keyed transport mode IPSEC connection (non tunnel) but it didn't work. Will transport mode IPSEC work over the tunnlebroker?

thanks!
Logged

brad

  • Jr. Member
  • **
  • Posts: 82
Re: IPsec transport mode supported on HE?
« Reply #1 on: June 29, 2009, 07:55:20 PM »

I tried doing a manual keyed transport mode IPSEC connection (non tunnel) but it didn't work. Will transport mode IPSEC work over the tunnlebroker?

thanks!

Then you have misconfigured something. This definitely has nothing to do with the service provided by HE.
Logged

Doug0915

  • Newbie
  • *
  • Posts: 2
Re: IPsec transport mode supported on HE?
« Reply #2 on: June 30, 2009, 04:58:19 AM »

I tried doing a manual keyed transport mode IPSEC connection (non tunnel) but it didn't work. Will transport mode IPSEC work over the tunnlebroker?

thanks!

Then you have misconfigured something. This definitely has nothing to do with the service provided by HE.

Well, I was curious because transport mode IPSEC is a different protocol type (protocol 50 and 51) and I've found that sometimes router engineers don't allow those protocols through (by forgetting to set them, etc).

Tunnel mode should work fine since it's encapsulated by UDP. I'll check my setkey settings again.
Logged