Only able to browse ipv6 site if no ipv4 address

[bradd]

Turned off the firewall, no change.

Bypassed the router and I see the same thing.

[cholzhauer]

If you bypassed the router you'd need to change your 10.0... IP address to your public one.

[bradd]

Ok, seems like the router is the problem.  It is a Cisco enterprise router and the config clearly shows that 41 is allowed through.

[cholzhauer]

Let's see the config and model #

[bradd]

Got it.  Needed a reboot.

My computer still prefers ipv4.

Is it picking v4 because the metric in the route is lower?

[cholzhauer]

Are you getting a 2001 address now?

[jgeorge]

Yes, IPv4 is preferred over 6in4
What commands did you use for the tunnel?
Is your router passing protocol41?

BTW, cholzhauer, this was post #10000 on the forums (at least as far as the forum footer is concerned), congrats! Fitting it should go to the most prolific helper here. :)

Cheers,

Joe

[jimb]

Yes, IPv4 is preferred over 6in4
What commands did you use for the tunnel?
Is your router passing protocol41?

BTW, cholzhauer, this was post #10000 on the forums (at least as far as the forum footer is concerned), congrats! Fitting it should go to the most prolific helper here. :)

Cheers,

Joe

I used to think I posted a lot, then Cholz came along.   ;D  (Well, I also got a job)