ZyXEL C3510XZ

[shinji]

I'm a current Quantum Fiber customer that has a C3510XZ.  Currently I'm trying to complete the setup for IPv6 on it and I got the 6RD functionality to work with the tunnel.  I know it isn't really supported but the tunnel does work and the LAN side is assigning out IPv6 addresses to computers using the routing subnet I gave it.

With that said it also has Dynamic DNS functionality that I can't seem to get to work.  I fill in the custom settings and it keeps saying Not Authorized.  As far as I can tell it is correct but something seems off.


Host name I set to the tunnel ID.  Username is set to shinji and Password is set to the update key.

However when it tries here is what it throws into the log.

Code Select Expand

<13>1 2022-03-31T20:55:31-04:00 user.emerg zcmdModuleCfg - - - zcmdModuleCfg: System: _wanip_auth_check : Last time authentication is Not Accepted. Need to register again.
<13>1 2022-03-31T20:55:31-04:00 user.emerg zcmdModuleCfg - - - zcmdModuleCfg: System: beDynamicDnsStart : Enter
<13>1 2022-03-31T20:55:31-04:00 user.emerg zcmdModuleCfg - - - zcmdModuleCfg: System: ddnsGetInterfaceName: enter, 4
<13>1 2022-03-31T20:55:31-04:00 user.emerg zcmdModuleCfg - - - zcmdModuleCfg: System: Command /usr/sbin/ez-ipupdate -S userdefined_HTTPS -U ipv4.tunnelbroker.net/nic/update -h "755961" -u "shinji:redacted" -i eth0.3 -t 10

I just don't know if there is anything I can do to make this work.  I've also thought to use some sort of more lenient script to send it to and act as a relay or forwarder to push to HE automatically but can't find anything to fit the bill.

[tjeske]

Try this as URL "ipv4.tunnelbroker.net/nic/update?hostname=<id>" where you replace "<id>" with your tunnel id.