Hurricane Electric's IPv6 Tunnel Broker Forums

Advanced search  

News:

Welcome to Hurricane Electric's Tunnelbroker.net forums!

Author Topic: Openwrt Barrier Breaker and tunnelbroker.net routed /48 prefix  (Read 3094 times)

evantkh

  • Full Member
  • ***
  • Posts: 122
Openwrt Barrier Breaker and tunnelbroker.net routed /48 prefix
« on: October 04, 2014, 04:14:53 AM »

Openwrt only allows one ipv6 routed prefix configured in the 6in4 tunnel. Therefore, I cannot configure both the routed /64 and /48 in the router. Is here anyone knows how to configure so that I don't need to enter the command on every boot?
Logged

cholzhauer

  • Hero Member
  • *****
  • Posts: 2724
Re: Openwrt Barrier Breaker and tunnelbroker.net routed /48 prefix
« Reply #1 on: October 04, 2014, 02:50:34 PM »

I assume this is your routed /64 and not your tunnel /64?

If that's the case, you don't need your routed /64...you have 64k worth of /64's in your /48
Logged

evantkh

  • Full Member
  • ***
  • Posts: 122
Re: Openwrt Barrier Breaker and tunnelbroker.net routed /48 prefix
« Reply #2 on: October 04, 2014, 09:44:51 PM »

Maybe you are right, it is impossible to use all the /64 prefixes in a /48 prefix.
Logged