General IPv6 Topics > IPv6 on Routing Platforms

ZyXEL C3510XZ

(1/1)

shinji:
I'm a current Quantum Fiber customer that has a C3510XZ.  Currently I'm trying to complete the setup for IPv6 on it and I got the 6RD functionality to work with the tunnel.  I know it isn't really supported but the tunnel does work and the LAN side is assigning out IPv6 addresses to computers using the routing subnet I gave it.

With that said it also has Dynamic DNS functionality that I can't seem to get to work.  I fill in the custom settings and it keeps saying Not Authorized.  As far as I can tell it is correct but something seems off.


Host name I set to the tunnel ID.  Username is set to shinji and Password is set to the update key.

However when it tries here is what it throws into the log.

--- Code: ---<13>1 2022-03-31T20:55:31-04:00 user.emerg zcmdModuleCfg - - - zcmdModuleCfg: System: _wanip_auth_check : Last time authentication is Not Accepted. Need to register again.
<13>1 2022-03-31T20:55:31-04:00 user.emerg zcmdModuleCfg - - - zcmdModuleCfg: System: beDynamicDnsStart : Enter
<13>1 2022-03-31T20:55:31-04:00 user.emerg zcmdModuleCfg - - - zcmdModuleCfg: System: ddnsGetInterfaceName: enter, 4
<13>1 2022-03-31T20:55:31-04:00 user.emerg zcmdModuleCfg - - - zcmdModuleCfg: System: Command /usr/sbin/ez-ipupdate -S userdefined_HTTPS -U ipv4.tunnelbroker.net/nic/update -h "755961" -u "shinji:redacted" -i eth0.3 -t 10
--- End code ---

I just don't know if there is anything I can do to make this work.  I've also thought to use some sort of more lenient script to send it to and act as a relay or forwarder to push to HE automatically but can't find anything to fit the bill.

tjeske:
Try this as URL "ipv4.tunnelbroker.net/nic/update?hostname=<id>" where you replace "<id>" with your tunnel id.

Navigation

[0] Message Index

Go to full version