Hurricane Electric's IPv6 Tunnel Broker Forums

Advanced search  

News:

Welcome to Hurricane Electric's Tunnelbroker.net forums!

Author Topic: Very important Cisco command  (Read 6853 times)

broquea

  • Sr. Network Engineer, HE.NET AS6939
  • Administrator
  • Hero Member
  • *****
  • Posts: 1731
Very important Cisco command
« on: July 29, 2009, 07:58:16 PM »

ipv6 unicast-routing

I'm noticing a number of Cisco users that try to use their routed /64 or /48 on an interface, and can't seem to get connectivity to their LAN hosts.
Logged

rmis

  • Newbie
  • *
  • Posts: 4
Re: Very important Cisco command
« Reply #1 on: February 22, 2012, 03:00:26 AM »

This should be made sticky.. would have saved me 2 days..

Logged
I should be studying for my CCNA, but i'm stuck obsessed with IPV6

kcochran

  • Sr. Network Engineer, Hurricane Electric
  • Administrator
  • Sr. Member
  • *****
  • Posts: 418
Re: Very important Cisco command
« Reply #2 on: March 02, 2012, 08:54:35 AM »

Added a note about that to the IOS example configuration.
Logged

antillie

  • Full Member
  • ***
  • Posts: 104
Re: Very important Cisco command
« Reply #3 on: March 17, 2012, 11:37:40 AM »

no ipv6 source-route
ipv6 cef

Although not strictly required these are also very useful and should be on every IPv6 enabled internet facing IOS router in my opinion.
Logged

RedShift2

  • Newbie
  • *
  • Posts: 3
Re: Very important Cisco command
« Reply #4 on: May 01, 2012, 06:12:58 AM »

no ipv6 source-route
ipv6 cef

Although not strictly required these are also very useful and should be on every IPv6 enabled internet facing IOS router in my opinion.
Using IPv6 CEF breaks IPv6 via PPTP (1811 15.1(2)T)
Logged

antillie

  • Full Member
  • ***
  • Posts: 104
Re: Very important Cisco command
« Reply #5 on: July 23, 2012, 08:51:22 AM »

Have you tried it on a stable release?
Logged