I'm clueless with this

[alberto90]

I'm still not sure if this is going to work.  My ISP have told me that I may not be able to access the router using the telnet commands and if I reset it to factory settings they have told me there are still no guarantees that I will be able to change the password I have the feeling that the passwords may be set on installation.  They said they don't support proxy server set ups when I pressed them on the subject obviously they asked me why I wanted access to the router.

Changing the speedtouch password from the website does nothing I have used a number of passwords my talktalk email and password, Admin, password, etc none of it works with the cmd telnet when I enter the password.  I can't find anywhere else on the speed touch website where it needs to be entered.

http://192.168.1.254/

I got installation instructions very similar to the below when I installed this 510 v6 a few weeks ago and all I put in was my talktalk username and password.

http://support.talktalk.co.uk/cgi-bin/uk_tiscali.cfg/php/enduser/std_adp.php?p_faqid=521&p_created=1175687424&p_sid=6Oua_qmk&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NTIsNTImcF9wcm9kcz0wJnBfY2F0cz0mcF9wdj0mcF9jdj0mcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1zcGVlZHRvdWNoIDUxMA!!&p_li=&p_topview=1

[donbushway]

The address of your router is

192.168.1.254

Thanks!  After I bypass the password bit I get this.  I've used my windows admin pass and my ISP pass but they don't seem to let me pass this stage.  I'll retry them all
Username : Administrator
Password :
------------------------------------------------------------------------

                            ______  SpeedTouch 510
                        ___/_____/\
                       /         /\  6.1.18.6
                 _____/__       /  \
               _/       /\_____/___ \  Copyright (c) 1999-2006, THOMSON
              //       /  \       /\ \
      _______//_______/    \     / _\/______
     /      / \       \    /    / /        /\
  __/      /   \       \  /    / /        / _\__
 / /      /     \_______\/    / /        / /   /\
/_/______/___________________/ /________/ /___/  \
\ \      \    ___________    \ \        \ \   \  /
 \_\      \  /          /\    \ \        \ \___\/
    \      \/          /  \    \ \        \  /
     \_____/          /    \    \ \________\/
          /__________/      \    \  /
          \   _____  \      /_____\/
           \ /    /\  \    /___\/
            /____/  \  \  /
            \    \  /___\/
             \____\/

------------------------------------------------------------------------
_{Administrator}=>

At this point you are in the router at a command prompt. Use the commands Hisken gave you to enable ping response.

[alberto90]

May as well have another go at this.  What shall I do now I'm at the cprompt?

[alberto90]

Looks like interest has been lost.

[alberto90]

I'm preparing to give up with this.  Can anyone help? It will test your patience and professional knowledge and tutoring skills.  That's what I thought help forums were for :)

Thanks

[alberto90]

 :-* :-* :-* :-* ;D ;D