Print

[htpctk]

hi all thanks for viewing, i setup my tunnel and have my ipv6 tunnel going good

i told tunnelbroker, i am using afraids NS servers

after that i setup the reverse  part on afraid, and chose "haha.im.laggg.in" for the host

and it seems like everything setup, but everytime i reverse dns the ipv6 address im using i get "htpctk-1-pt.tunnel.tserv9.chi1.ipv6.he.net"

how do i get it to be haha.im.laggg.in?!

i didnt do any extra steps in windows, just the ones the tunnelbroker suggested, do i need to do that .arpa stuff ?

where do i do this at? is afraid.org and tunnelbroker all i need to make the rdns work? thanks so much if you can help me

[tufinhas]

you cannot change the tunnel ::1 ::2 reverses
only the Routed /64 or /48

add one ip of Routed /64 to your lan nic

[snarked]

IPv6 rdns works just fine at afraid.org.  However, you have to give it the correct zone (as noted above).

[htpctk]

thanks so much for the replys, but how do i do this in cmd in windows? im a bit lost on your comments, like i'm not sure how to do it, thanks a ton if i can get this working, i will try to teach this to others if i can manage to get it to work

thanks again all 

EDIT: what i meant to ask, is how do i change my comptuers ipv6 address to something else besides ::2??
thank you so much

how would i make it a long ipv6 address like "2001:470:1f07:365:0102:2395:3995:1382"

is this possible? all i see is people with shorter ipv6 addresses from he
thanks again

[htpctk]

how do i make my PC's IP not the ::2? i tried many things like changing parts of the config, but i allways seem to get it, even try trying like /64 or my own ::254


anyone ? thank you

edit: okay i somehwat figured it out, on the 2nd part of the config
i did ::/64 instead of 0

then for the actual IP i did whatever i wanted. like 4, or 145

now to see if i can do the reverse dns


thanks

[htpctk]

damn sitll no reverse dns

anything extra i have to do? that isnt in the normal config, arpa stuff? where do i put that stuff? thank you

[tufinhas]

http://whatismyip.everdot.org/

check if you still use tunnel address

you need use one ip of "Routed /64" to setup reverse dns



# read this
http://www.sixxs.net/faq/connectivity/?faq=usingsubnet&os=windows

# add one ip of your Routed /64
netsh int ipv6 add add "name of adapter" IPv6address

edit:
http://www.tunnelbroker.net/forums/index.php?topic=171.0

[htpctk]

IPv6 rdns works just fine at afraid.org.  However, you have to give it the correct zone (as noted above).

what would a example be of a router /64?! thank you

[tufinhas]

[broquea]

what would a example be of a router /64?! thank you

2001:470:1f0e is the pool your Point-to-point is allocated from.

2001:470:1f0f is the pool your routed /64 is allocated from.

Note the difference between "E" and "F".

[htpctk]

thanks for the replies, i think i made a error on afraid. i will give it a day to make the changes and it might work!

thank you for the replies, i was using the part you both mentioned but accidently had a typo, i will see if that was the problem

thanks again all